Hayward MaxFlo XL Pool Pump

Angled three quarter view of the Hayward MaxFlo XL Pool Pump, isolated on a transparent background, with the strainer pot and suction port facing toward the left side of the image and the motor extending to the right. The large threaded suction opening is visible at the far left edge, while the wet end’s rounded face carries a warning label on the lower left curve. The threaded discharge outlet rises vertically from the top centre of the wet end, set between the strainer lid and the motor connection point. The motor body on the right shows a gold specification label along the top and a rounded end cap at the far right, and the base beneath has a low, wide footprint with a recessed opening under the motor section for clearance and mounting. Angled three quarter view of the Hayward MaxFlo XL Pool Pump, isolated on a transparent background, with the strainer housing on the left and the cylindrical motor extending to the right. The tall, rounded strainer pot sits at the left end with a wide, flat lid on top, while a threaded discharge outlet rises from the top centre of the wet end like a short vertical collar. The motor body runs horizontally to the right with a long gold specification label along the upper side and a smooth black end cap at the far right. The pump sits on a moulded base with two curved feet, and the seal plate area between the wet end and motor shows exposed fasteners and bracket details along the midline. Side profile view of the Hayward MaxFlo XL Pool Pump, isolated on a transparent background, showing the full length of the unit with the strainer pot on the left and the motor on the right. A large, threaded suction port is visible at the far left edge, aligned horizontally, while the threaded discharge outlet sits on top of the wet end near the left centre, pointing straight upward. The strainer housing has rounded shoulders and a broad lid, and the motor section to the right shows vent slots near the lower portion and a long gold label running along the upper side. The pump base spans the entire length, with a recessed handle-like opening under the motor section and broad mounting feet at both ends. Angled three quarter view of the Hayward MaxFlo XL Pool Pump, isolated on a transparent background, from the opposite side so the suction port faces to the right. The strainer pot and lid sit on the right side of the image with the large threaded suction inlet projecting outward at the far right, while the threaded discharge outlet rises vertically from the top of the wet end near the centre. The motor extends to the left, showing a gold label along its upper surface and a round end cap at the far left. The transition between the wet end and motor is reinforced by a ring of bolts and a ribbed seal plate, and the base sits low with two main feet and a central support under the motor. Top-down view of the Hayward MaxFlo XL Pool Pump, isolated on a transparent background, with the strainer lid and suction side on the left and the motor stretching to the right. The strainer lid forms a wide circular cap at the left end, and the suction port appears as a large round opening near the left edge, aligned horizontally. The discharge outlet stands as a short, threaded vertical neck near the centre of the wet end. The motor occupies the right half as a long cylinder with a gold label running lengthwise, and the base rails and mounting tabs are visible as dark structural shapes beneath the body. End-on view of the Hayward MaxFlo XL Pool Pump from the motor side, isolated on a transparent background, with the motor’s round end cap dominating the foreground. Behind it, the wet end rises upward, showing the upper handle-like arch and the threaded discharge outlet positioned at the top centre. Four prominent fasteners frame the seal plate area around the motor connection, creating a square-like bolt pattern around the motor’s attachment point. The base appears as a broad, curved platform beneath the motor, with the wet end’s bulk tapering upward toward the lid. End-on view of the Hayward MaxFlo XL Pool Pump from the strainer pot side, isolated on a transparent background, centred on the large circular suction opening with the strainer basket grid visible inside. The strainer housing forms a tall rounded face with a broad lid above, and a rectangular warning label spans across the midsection beneath the suction port. The side mounting points and fasteners are visible on both left and right edges of the wet end, and the base flares outward at the bottom, creating a stable pedestal under the strainer pot. Angled three quarter view of the Hayward MaxFlo XL Pool Pump, isolated on a transparent background, showing the embossed “HAYWARD” branding on the side of the wet end. The motor sits to the left with a gold specification label along the upper side and vent slots along the lower section, while the strainer pot rises on the right with the large threaded suction port projecting straight out to the right edge. The threaded discharge outlet stands vertically on the top centre of the wet end. A warning label panel is visible on the wet end’s outer curve near the lower right, and the base shows a wide stance with a recessed opening beneath the motor section. Side profile view of the Hayward MaxFlo XL Pool Pump, isolated on a transparent background, with the motor on the left and the strainer pot on the right. The large threaded suction port is clearly visible at the far right, aligned horizontally, while the threaded discharge outlet rises from the top of the wet end near the centre. The motor cylinder on the left shows a gold label along the top and ventilation slots along the lower side, and the junction between motor and wet end is reinforced by a bolted flange. The base runs underneath as a continuous support rail with broad feet at both ends. Angled three quarter view of the Hayward MaxFlo XL Pool Pump, isolated on a transparent background, with two black union fittings and two round O-ring gaskets laid out beneath the pump near the bottom centre. The motor is positioned on the left with a gold label along the upper surface, and the wet end and strainer pot sit to the right, showing the large threaded suction port facing outward to the right and the vertical threaded discharge outlet on top near the centre. The “HAYWARD” embossing is visible on the wet end’s side, and a warning label sits on the outer curve of the housing. The accessories below are arranged as two cylindrical unions placed side-by-side with the two circular gaskets separated slightly in front of them. Isolated product view of two Hayward MaxFlo XL pump union fittings and two matching O-ring gaskets displayed against a transparent background. The two black plastic union fittings are positioned horizontally across the image, one on the left and one on the right, each featuring a wide, ribbed locking nut at the base and a short cylindrical pipe socket extending upward from the centre opening. Below and slightly offset from each union fitting is a flat, circular rubber O-ring, laid flat to show its round shape, consistent thickness, and smooth sealing surface. The components are evenly spaced and clearly separated, allowing the threaded union design, connection openings, and sealing gaskets to be clearly distinguished for use on the MaxFlo XL pump’s inlet and outlet connections.
Pumps

MaxFlo XL

12.5" x 9.9" x 30.8"

The Hayward MaxFlo XL Pool Pump stands out as one of the most energy-efficient pumps in its class, balancing strong performance with impressive economy. Designed to align seamlessly with the entire MaxFlo family, it simplifies retrofit projects while remaining a smart choice for new pool installations thanks to its efficient hydraulic design and convenient union connections.

Built to meet Department of Energy efficiency standards, MaxFlo XL uses advanced hydraulics to improve priming and reduce energy use, supported by a heavy-duty motor built for dependable operation. A four-bolt access design makes servicing straightforward, while the clear strainer cover seals with less than a quarter turn for quick basket checks. Standard 1½” by 2″ union connections ensure flexible installation, with an optional riser base available to align with Sta-Rite Dyna-Pro systems.

The Hayward Expert Line logo shown on a transparent background, featuring the words “EXPERT LINE” in bold, uppercase, sans serif lettering rendered entirely in solid black. The word “EXPERT” appears on the left, followed by a visually distinctive stylised “X” that is wider and more angular than the surrounding letterforms, acting as a central visual anchor within the logo. This stylised X is formed using sharp, intersecting diagonal strokes that create a strong, geometric appearance, subtly separating “EXPERT” from “LINE” while drawing emphasis to the centre of the logo. The word “LINE” appears to the right in matching black uppercase lettering, aligned on the same baseline with consistent stroke weight and spacing. There is no mention of the Hayward name within the logo, no colour accents, no gradients, no outlines, no shadows, no icons, and no additional graphic elements. The minimalist black typography relies on high contrast against the transparent background, ensuring clarity and legibility when overlaid on any surface while conveying a premium, professional, trade focused brand identity.

HAYWARD EXPERT LINE products can only be purchased through authorized Hayward distributors like Crown Spas & Pools. Exclusions, other terms, and conditions may apply.

  • Collection: In-Ground Collection
  • Application: Aftermarket
  • Pool Type: In-Ground
  • Motor Type: ODP
  • Number of Speeds: Single Speed
  • Phase: Single Phase
  • Quick Clean Button Not included
  • Remote Mount Display Not included
  • Rotatable Display Not included
  • Twist Lock Not included
  • Labor Warranty Not included
  • Parts Warranty: 1-Year
  • WEF: 4.3

Specifications

  • Collection: In-Ground Collection
  • Dimensions: 12.5" x 9.9" x 30.8"
  • Weight: 32.5 lb
  • Brand: Hayward
  • Channel: Expert Line
  • Total HP: 0.95HP (3/4)
  • SKU: SP2305X7
  • GTIN: 610377143387
  • DOE Compliant: Yes
  • Voltage at 60Hz: 115/208-230 V

Request a Quote

Interested in the following product or even a custom-built hot tub, swimming pool, or backyard upgrade?

At Crown Spas & Pools, our goal is to help homeowners create their dreamscapes with custom-built hot tubs, swimming pools, high-quality outdoor patio furniture, and the latest swim spa products. Please complete our form to get a personalized quote tailored to your needs and our team will get back to you at the earliest possible opportunity.