PSP Custom Swimming Pool Safety Cover

Installed grey PSP Pool Safety Cover fitted over a custom in-ground pool on a stone patio with deck tension straps.

Covers

PSP Pool Safety Cover

Protect your backyard swimming pool through cold Manitoba winters with a heavy-duty PSP Pool Safety Cover. Canadian manufacturer PSP Fabricating builds these mesh covers in Barrie, Ontario to meet strict ASTM F1346-91 safety standards. To help local pool owners, Crown Spas & Pools supplies Winnipeg homeowners with stock rectangular sizes and custom-built pool covers.

PSP crafts each cover from dense, UV-treated mesh fabric that filters rainwater and melting snow into your pool. Because this porous mesh lets water pass through, it prevents heavy pooling on top while blocking leaves, twigs, and debris. In addition, computer-controlled cutting systems guarantee precise panel alignment for clean deck installation.

Built for Strength and Deck Anchoring

Commercial-grade hardware anchors the cover securely to keep children and pets safe year-round. For instance, flush brass deck anchors screw down flat against your concrete patio during the swimming season. Meanwhile, heavy-duty stainless steel springs maintain constant grid tension, while protective spring covers prevent deck scraping. Crown Spas & Pools also provides specialized wood deck anchors and lawn stakes for custom deck layouts.

Stock and Custom Sizing Options

PSP stocks standard rectangular cover sizes for quick turnaround during the fall winterization season. Specifically, standard inventory spans sizes from 12×24 feet up to 20×40 feet with standard 5×5 foot grid patterns.

However, custom pool shapes and step configurations require precise A-B point measurements. Before ordering, review our Pool Safety Cover Measuring Guide to capture your exact layout. Our team at Crown Spas & Pools handles measuring and layout planning for Manitoba pool owners so PSP can build your custom cover.

Simple Pool Safety Cover Installation

Installers set corner anchors first using 3/4-inch drill holes in concrete deck surfaces. Next, tensioning straps compress the stainless steel springs by 10 to 20 percent to maintain a taut surface. As a result, this spring compression absorbs heavy snow loads and prevents wind lifting during winter storms. Follow our step-by-step Pool Safety Cover Installation Guide for complete deck fitting instructions.

Order Your Safety Cover in Winnipeg

Finally, visit our Winnipeg showroom at Crown Spas & Pools to examine fabric samples and anchor hardware. Our pool specialists verify your measurements and order the complete hardware package for your backyard layout. Contact our team today to schedule your safety cover consultation.

Request a Quote Today

Standard Mesh

Taupe PSP Pool Safety Cover standard mesh swatch showing a tight vertical weave of tan and dark threads.

Taupe

Blue PSP Pool Safety Cover standard mesh swatch displaying a royal blue woven grid with vertical line patterns.

Blue

Dark green PSP Pool Safety Cover standard mesh swatch showing a fine woven fabric with vertical line patterns.

Green

Grey PSP Pool Safety Cover standard mesh swatch featuring a contrasting light and dark grey vertical woven pattern

Grey

Solid black PSP Pool Safety Cover standard mesh material swatch showing a dense, finely woven grid texture.

Black

Ultra Mesh

Taupe PSP Pool Safety Cover ultra mesh swatch showing a high-density, finely woven micro-mesh texture.

Taupe

Blue PSP Pool Safety Cover ultra mesh swatch displaying a dark navy blue tone and tight, high-density woven texture.

Blue

Green PSP Pool Safety Cover ultra mesh swatch displaying a dark forest green tone with a tight micro-grid texture.

Green

Grey PSP Pool Safety Cover ultra mesh swatch featuring a dense, fine vertical weave in a charcoal grey tone.

Grey

Black PSP Pool Safety Cover ultra mesh swatch showing a high-density, fine vertical weave in jet black.

Black

PSP Pool Safety Cover shape configuration diagram depicting a standard rectangular pool layout with straight edges.

Rectangle

PSP Pool Safety Cover shape configuration diagram depicting a Grecian pool layout with angled corners.

Grecian

PSP Pool Safety Cover shape configuration diagram depicting an oval pool layout with straight sides and rounded ends.

Oval

PSP Pool Safety Cover shape configuration diagram depicting a rectangular pool layout with one arched Roman end.

One Roman End

PSP Pool Safety Cover shape configuration diagram depicting a double Roman end pool layout with a step section.

Two Roman End

PSP Pool Safety Cover shape configuration diagram depicting a Full L-shaped pool layout with straight edges.

Full L

PSP Pool Safety Cover shape configuration diagram depicting a Lazy L pool layout with an angled diagonal section.

Lazy L

PSP Pool Safety Cover shape configuration diagram depicting a custom freeform pool layout with sweeping curves.

Freeform

PSP Pool Safety Cover anchor stake hardware featuring a tubular silver body with a brass anchor insert.

Anchor Stake

Stainless steel strap buckle for a PSP Pool Safety Cover featuring triple slots and embossed PSP CANADA lettering.

Buckle

Brass concrete anchor assembly for a PSP Pool Safety Cover, showing a threaded bolt and knurled brass casing.

Concrete Anchor

Elongated silver garden stake with brass anchor insert for a PSP Pool Safety Cover lawn installation.

Garden Stake

Red T-handle hex key installation tool with silver hexagonal shaft for PSP Pool Safety Cover anchors.

Hex Key

Steel PSP Pool Safety Cover installation rod with black rubber grip handle and detachable end cap.

Installation Rod

Standard stainless steel spring hardware for a PSP Pool Safety Cover with extended tension coils and strap buckle.

Spring

Short stainless steel spring hardware for a PSP Pool Safety Cover with heavy-duty tension coils and hooks.

Short Spring

Black vinyl spring cover sleeve for a PSP Pool Safety Cover with white PSP Fabricating Inc logo.

Spring Cover

Brass wood deck anchor assembly for a PSP Pool Safety Cover with bevelled flange and PSP CANADA stamped hex insert.

Wood Anchor

PSP Fabricating warrants every pool safety cover against material and manufacturing defects under normal residential use. This 20-year limited warranty delivers long-term protection for your backyard investment. You receive your official warranty coverage terms by email upon product registration.

  • Fabric Build: UV-treated mesh and solid vinyl fabrics with polyester reinforcement.
  • Webbing & Straps: Heavy-duty polyester webbing, straps, and reinforced stitching.
  • Hardware & Anchors: Brass deck anchors, stainless steel springs, D-rings, and corner hardware.

Coverage Schedule

  • Years 1–5: 100% free repair or replacement at company discretion.
  • Years 6–20: Replacement cover at 50% of the original purchase price.

Excluded Conditions

This policy excludes damage from animals, falling tree limbs, fire, theft, or natural disasters. It also excludes excessive snow loads, standing water from improper drainage, and foot traffic. Chemical damage from unbalanced water (low pH, high chlorine, or low calcium hardness) voids coverage.

Normal UV fading, mishandling during installation or storage, and transport damage after delivery remain excluded. Deck owners maintain responsibility for anchor seating and routine anchor maintenance. Unauthorized modifications, repairs, or using the cover on an unintended pool void all warranty protections.

Conditions That Void Warranty

  • Water Level Rule: Allowing pool water levels to drop more than 18 inches below the deck during snow season.
  • Missing Label: Removing or damaging the cover product label. PSP requires a label photo for every claim.
  • Unauthorized Installation: Installation or alterations by non-authorized installers.
  • Non-Residential Use: Utilizing the cover for commercial, rental, or public pool applications.

Contact our Winnipeg showroom team to assist with your cover registration, winter maintenance guidelines, or warranty claims.